The BreadMate range.

A range of useful circuit boards that are designed to plug into your breadboard. They're not complicated, but they should certainly mean you can get on with prototyping and spend less time putting buttons and LEDs onto your board. Simply plug in a BreadMate and away you go!. Each board is provided fully populated and comes with clean, clear code examples.

LED 8

These boards simply provide 8 LEDs connected to 8 pins (a flying lead provides ground).

toptopthe topside of the LED 8 board undersideundersidethe underside of the LED 8 board
8 glorious surface-mount LEDs.
  • 8 LEDs
  • less than one inch long
  • only 8 i/o pins used
  • Use for port diagnostics
  • get one board of each colour!
  • 0.7" by 0.9" (18mm by 23mm)

More details...

Button 4+1

5 'tactile' buttons in an up, down, left, right, centre configuration.

toptopthe topside of the Button 4+1 board undersideundersidethe underside of the Button 4+1 board
5 surface-mount tactile pushbuttons
  • up/down/left/right/centre configuration
  • 5 i/o pins required
  • ground flying lead
  • 1.4" by 1.2" (36mm by 30mm)

More details...